OKM – Brief instructions
Recommended settings for OKM II K with A3 on portable recorders
|
SPL [dB]
|
SP [Pa]
|
estimated loudness
|
Input
|
ATT.
(Recorder)
|
A3 ATT
|
|
100 to 120
|
2 to 20
|
loud
|
LINE
|
-
|
20 dB
|
|
82 to 102
|
0,25 to 2,5
|
medium
|
LINE
|
-
|
0 dB
|
|
63 to 83
|
0,03 to 0,3
|
low
|
MIC
|
20 dB
|
0 dB
|
|
43 to 63
|
3 to 30
|
very low
|
MIC
|
0 dB
|
0 dB
|
- Estimate
the loudness and adjust your devices accordingly. Watch the level
meter and set the desired recording level. Check the recording level
control setting. If within 3...10 is ok, you can start recording.
- If
level should be low with control set to "10" : Please choose
the settings of the line below and try again. To minimize noise, approach
the sound source.
- Control
settings below "3" indicate that the sound level was underestimated
and distortions due to pre-stage clipping may occur. Please choose
settings of line above.
- In
case of very high sound levels (PA), the special version OKM II R
(=Rock) is recommended. Then add 20 dB to above SPLs. When using the
OKM I, add 6 dB.
|
|